GX Touch 50 adapter for CCGX cut-out

GX Touch 50 adapter for CCGX cut-outThis adapter is designed to easily replace the CCGX display with the newer GX Touch. Contents of the packaging are the metal bracket, the plastic bezel, and four mounting screws. There are two methods of mounting: Install including screen most secure mounting of the GX Touch display Install excluding screen GX Touch display is easier to remove, and the adapter can be mounted before completing the wiring Refer to the Quick Installation Guide for

The same functionality is also available via local LAN network or via the built-in WiFi access point of the Ekrano GX

the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current

The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles

halogen lamps or electric tools

current only can only flow from the IN terminal to the OUT terminal

With its switching time of less than 20 milliseconds

This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption

you can expand capacity and ensure redundancy

Tank sender wiring is kept as simple as possible: two of the four inputs provide a 24 V power supply

Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell

and in case of use with a charger

When you use a Skylla-i or a MPPT with CAN bus in the system